Cabinets

Surface heating and cooling manifolds should be mounted in special installation cabinets which are available in three basic versions: surface-mounted, flush-mounted and covered with glaze.

The design of installation cabinets for surface heating and cooling enables the assembly of manifolds with and without a mixing system. The cabinets also provide space for the electrical strips. Electrical strips are fitted with screws to a specially prepared holes on the mounting rail at the top of the cabinet.<br> Fast selection of cabinets, depending on the type of manifold, basic equipment and how connection method is presented in the table below:

Type of cabinet	Code	Height [mm]	Width [mm]	Depth [mm]	Number of circuits
Type of cabinet	Code	Height [mm]	Width [mm]	Depth [mm]	OP manifold	manifold OP+Set-P/Set -K	OP manifold with mixing system
SWN-OP-10/3	1100-OP	710	580	140	2-10	2-7/2-6	2-3
SWN-OP-11/7	1110-OP	710	780	140	11-13	8-11/7-10	4-7
SWN-OP-15/10	1120-OP	710	930	140	14-15	12-14/11-13	8-10
SWPG-OP-10/3	1300G-OP	710	580	110-165	2-10	2-7/2-6	2-3
SWPG-OP-11/7	1310G-OP	710	780	110-165	11-13	8-11/7-10	4-7
SWPG-OP-15/10	1320G-OP	710	930	110-165	14-15	12-14/11-13	8-10
SWP-OP-10/3	1300-OP	750-850	580	110-165	2-10	2-7/2-6	2-3
SWP-OP-11/7	1310-OP	750-850	780	110-165	11-13	8-11/7-10	4-7
SWP-OP-15/10	1320-OP	750-850	930	110-165	14-15	12-14/11-13	8-10